VST OneTrack Spezifikationen PDF herunterladen (Seite 304)

- 304 -

2. Use the arrow buttons in the top right corner to set the number of visible

EQ modules.

This helps you avoid “screen cluttering” by hiding unused modules.

3. Click on the “Hi Quality” button to activate or deactivate Hi Quality

mode.

This setting affects all EQ modules for the channel.

4. Activate as many EQ modules as you need (up to four) by clicking on

their “Enable” buttons.

As soon as any of the EQs are activated, the “EQ” button indicator in the

channel strip is lit.

5. Set the parameters for the activated EQ module.

It is perhaps easiest to set up a playback cycle and experiment with the set-

tings until you get the desired sound.

Each EQ module contains a fully parametric one band equalizer, with the fol-

lowing parameters:

● Please note that high Gain values may give rise to distortion. Compensate

with the channel volume faders.

Hi Limit Determines the upper limit of the Frequency parameter. The highest

value for this is 16000 Hz.

Lo Limit Determines the lower limit of the Frequency parameter (down to 20

Hz). Nothing stops you from setting Hi Limit to its highest value and

Lo Limit to its lowest, and thereby get a very wide range for the Fre-

quency parameter. However, the narrower range you select, the ﬁner

resolution for the Frequency parameter.

Presets These are four preset pairs of values for the Hi and Lo Limit parame-

ters, allowing you to quickly select a range for the Frequency param-

eter (Lo, Lo Mid, Hi Mid or Hi).

Gain Governs the amount of boost or attenuation around the set frequency.

The value range is ± 12 dB.

Frequency The center frequency for the equalization. Around this frequency, the

sound will be boosted or attenuated according to the Gain setting.

The range of the Frequency parameter is determined by the Hi and Lo

Limits.

Q Determines the width of the frequency band around the center fre-

quency to be affected. The narrower frequency band, the more dras-

tic effect of the boost or attenuation.

Q Presets These are four presets for the Q value, ranging from a wide frequency

band to a very narrow band.

1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 494 495

Keine Kommentare

VST OneTrack Spezifikationen Seite 304