VST OneTrack Spezifikationen PDF herunterladen (Seite 22)

100

101

- 22 -

• The Channel pop-up (reached from the Inspector and the Chn column in

the Track list) lists the two channels as a stereo pair.

From this point on they can only be used together, as a pair.

• The Chn column in the Track List also indicates the use of two channels

by adding a star [*] after the channel number.

For example, “1*” means that channels 1 and 2 are used.

• Any Tracks set to the “other” audio channel in the resulting stereo pair,

will automatically be set to channel “Any”.

Let’s say you have a Track set to channel 3, and switch it to stereo. Then, any

Tracks playing back on channel 4 will automatically be set to channel “Any”.

• In the Mixer window, the two channels are tied together by a “stereo

banner” at the top.

A stereo channel pair in the Mixer.

• Stereo recordings that you make take up two audio channel lanes in the

audio editor, see page 231.

Recording in stereo

Making a stereo recording is actually no different from making a mono recording.

Just make sure that the two audio outputs you want to record (probably the left and

right sides of a stereo source) are connected to the correct inputs (see the Getting

Started book and page 196 for details about inputs).

In this example,

all

Tracks

(in a 16 channel system) are

set to stereo.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 494 495

Kommentare zu diesen Handbüchern

Keine Kommentare

VST OneTrack Spezifikationen Seite 22

Kommentare zu diesen Handbüchern